SCANDIQUICK
Powder
Cold-curing acrylic mounting resin, a rapid mounting resin cures for a short time in approx. 6 minutes. The orange, slightly transparent SCANDIQUICK achieves a very good bond to the specimen and grants excellent, bubble-free results.
Please register to see prices
SCANDIQUICK
Hardener liquid
Cold-curing acrylic mounting resin, a rapid mounting resin cures for a short time in approx. 6 minutes. The orange, slightly transparent SCANDIQUICK achieves a very good bond to the specimen and grants excellent, bubble-free results.
Please register to see prices
SCANDIPLAST
Cast resin
Cold-curing polyester mounting resin, a standard mounting resin cures between 30 - 60 minutes. The green, transparent SCANDIPLAST achieves a good bond to the specimen and grants excellent, bubble-free results.
Please register to see prices
SCANDIPLAST - HARDENER
Hardener
Cold curing polyester mounting resin, a standard mounting resin cures between 30 - 60 minutes. The green, transparent SCANDIPLAST achieves a good bond to the specimen and grants excellent, bubble-free results.
Please register to see prices
SCANDIPLEX
Cast resin
Cold-curing epoxy mounting resin, a special mounting resin cures between 50 - 60 minutes. The yellow, transparent SCANDIPLEX achieves an excellent bond to the sample and very good, bubble-free results. SCANDIPLEX is especially suitable for geometrically complicated parts as well as for vacuum embedding.
Please register to see prices
SCANDIPLEX
Hardener
Cold-curing epoxy mounting resin, a special mounting resin cures between 50 - 60 minutes. The yellow, transparent SCANDIPLEX achieves an excellent bond to the sample and very good, bubble-free results. SCANDIPLEX is especially suitable for geometrically complicated parts as well as for vacuum embedding.
Please register to see prices
AEQUIDUR - Type S
Hardener (soft), for copper, aluminium, etc.
Hardness-adjusting powder for exact, sharp-edged specimens. It adapts the hardness of the investment material to the specimen hardness and reliably avoids any relief formation.
Please register to see prices
AEQUIDUR - Type M
Hardener (medium), for steels
Hardness-adjusting powder for exact, sharp-edged specimens. It adapts the hardness of the investment material to the specimen hardness and reliably avoids any relief formation.
Please register to see prices
AEQUIDUR - Type H
Hardener (hard), for carbide etc.
Hardness-adjusting powder for exact, sharp-edged specimens. It adapts the hardness of the investment material to the specimen hardness and reliably avoids any relief formation.
Please register to see prices
Aequidur - measuring aid
For easier measuring and mixing of AEQUIDUR.
Contents: 1 measuring mould made of silicone rubber and 3 measuring spoons
Please register to see prices
SCANDIA - CLIP
Plastic clamp for fixing.
SCANDICLIP is a practical aid for fixing wires, pins and sheets and can be used for cold and hot embedding.
Please register to see prices
Embedding - Set
Practical aid for cold embedding consisting of: 1 silicone rubber base (250 x 300 mm), 50 mixing beakers with graduation for measuring and mixing, 20 glass stirring rods, 200 paper rounds (Ø 20 mm) for section identification.
Please register to see prices
Plastic cups with graduation
Mixing cup with graduation for measuring and mixing
Please register to see prices
Silicon rubber sheet
Silicone rubber underlay in size 250 x 300 mm.
To protect the workplace during embedding.
Please register to see prices
