Please note that sales are made exclusively to B2B customers. All prices plus VAT.
Go to homepage
€0.00*

B2B Webshop

To view this page, you have to be at least 18 years old!

SCANDIFORMS round

Product information "SCANDIFORMS round"
Flexible embedding mould. SCAN-DIA offers a wide range of silicone rubber embedding moulds. SCANDIFORMS are very flexible and absolutely dimensionally stable. The cured specimens can be easily de-mounted without leaving any residue and without the need to grease the mould. The SCANDIFORM can be reused immediately after each application. Caution: When using different SCAN-DIA mounting media, the mounting moulds should be used together and the different shelf lives should be observed. With polyester resin, e.g. SCANDIPLAST, the moulds are suitable for several thousand embeddings, with acrylic resin, e.g. SCANDIQUICK, for about 100 embeddings and with epoxy resin, e.g. SCANDIPLEX, for about 25-30 embeddings.
Gebrauchsanweisung

Product number: 9120

Prices are hidden for your customer group

Available, delivery time: 1-3 days

Inner-Ø
Product number: 9120

Ergänzende Produkte

SCANDIQUICK

SCANDIQUICK

Powder
Cold-curing acrylic mounting resin, a rapid mounting resin cures for a short time in approx. 6 minutes. The orange, slightly transparent SCANDIQUICK achieves a very good bond to the specimen and grants excellent, bubble-free results.

Please register to see prices
SCANDIQUICK

SCANDIQUICK

Hardener liquid
Cold-curing acrylic mounting resin, a rapid mounting resin cures for a short time in approx. 6 minutes. The orange, slightly transparent SCANDIQUICK achieves a very good bond to the specimen and grants excellent, bubble-free results.

Please register to see prices
SCANDIPLEX

SCANDIPLEX

Cast resin
Cold-curing epoxy mounting resin, a special mounting resin cures between 50 - 60 minutes. The yellow, transparent SCANDIPLEX achieves an excellent bond to the sample and very good, bubble-free results. SCANDIPLEX is especially suitable for geometrically complicated parts as well as for vacuum embedding.

Please register to see prices
SCANDIPLEX

SCANDIPLEX

Hardener
Cold-curing epoxy mounting resin, a special mounting resin cures between 50 - 60 minutes. The yellow, transparent SCANDIPLEX achieves an excellent bond to the sample and very good, bubble-free results. SCANDIPLEX is especially suitable for geometrically complicated parts as well as for vacuum embedding.

Please register to see prices
SCANDIPLAST

SCANDIPLAST

Cast resin
Cold-curing polyester mounting resin, a standard mounting resin cures between 30 - 60 minutes. The green, transparent SCANDIPLAST achieves a good bond to the specimen and grants excellent, bubble-free results.

Please register to see prices
SCANDIA - CLIP

SCANDIA - CLIP
Plastic clamp for fixing. SCANDICLIP is a practical aid for fixing wires, pins and sheets and can be used for cold and hot embedding.

Please register to see prices

SCANDIFORM Round Flexible Embedding Mold: Top Quality and Efficiency for Materialographers

For materialographers and preparators, SCAN-DIA provides a comprehensive selection of high-quality embedding molds, including the SCANDIFORM Round – a flexible and proven embedding mold. This product stands out for its versatility and high efficiency, meeting the demands of even the most challenging applications in materialography. SCANDIFORM Round embedding molds are crafted from silicone rubber, showcasing flexibility and dimensional stability. This is crucial to enable precise and reliable accommodation of samples of various sizes and shapes. The high flexibility of SCANDIFORM allows for secure sample fixation without risking unwanted pressure or deformations. One of the key features of the SCANDIFORM embedding mold is its outstanding demolding quality. The cured samples can be effortlessly released from the mold without residues, eliminating the need for additional greasing. This not only saves valuable time but also guarantees the integrity of the sample by protecting it from potential contaminations. Another advantage of the SCANDIFORM Round embedding mold is its reusability. After each use, the mold can be immediately used again. This leads to a significant reduction in the consumption of embedding molds, contributing to resource conservation and cost efficiency. It is important to note in the context of materialography that the choice of the embedding material influences the durability of the embedding mold. When using polyester resin, such as the high-quality SCANDIPLAST, the molds are suitable for several thousand embeddings, ensuring excellent longevity and sustainability. With acrylic resin, such as the high-performance SCANDIQUICK, the durability is approximately 100 embeddings, while with epoxy resin, such as the fast-drying SCANDIPLEX, about 25-30 embeddings can be achieved. In the world of materialography, the SCANDIFORM Round Flexible Embedding Mold is a reliable choice for precise and efficient sample preparation. Its flexibility, dimensional stability, demolding quality, and reusability make it an indispensable option for material scientists.